Thread
:
HOOKING UP AMP GAUGE ?
View Single Post
#
20
Posted to sci.electronics.repair
amdx[_3_]
external usenet poster
Posts: 706
HOOKING UP AMP GAUGE ?
On 4/21/2017 11:47 AM,
wrote:
Suggest circuits for linking an analog amp gauge to the output of a 200 amp auto
alternator for measuring output under load. ? links ? commercial units ?
Here's what you need, It is a shunt that you put in series with the
output of your alternator. You then can run small diameter wires to the
meter in the dash. They carry very little current.
https://www.bluesea.com/products/8019
$113.00
This page has a schematic, it is wired to measure battery current, you
need to put the shunt were it will measure alternator current.
See the last page.
http://assets.bluesea.com/files/reso...tions/9322.pdf
Here is a shunt for $16.00
http://www.allelectronics.com/item/s...00-amps/1.html
Here's the meter that will work with it.
http://www.allelectronics.com/item/p...l-meter/1.html
Mikek
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Reply With Quote
amdx[_3_]
View Public Profile
Find all posts by amdx[_3_]