On Tuesday, April 11, 2017 at 6:37:02 PM UTC-4, Tomos Davies wrote:
Given that you can have manufacturers' red and yellow match mounting
balancing dots can occur at any location on the tire sidewall, which,
theoretically, is the "most balanced" tire (out of the box) when chosen out
of a large selection of tires?
a. When the red and yellow dots are at or near the same location
b. When the red and yellow dots are about 180 degrees apart
c. When the red and yellow dots are about 90 degrees apart

We all know that the yellow dot is usually the tire light spot (to be
matched with the wheel heavy spot which is almost always the valve) and
that the red spot is generally the tire out-of-round (aka radial runout &
radial force variation) sidewall-thickness spot (which also is to be
mounted at the tire valve in most cases).

While the red dot wins (if both dots exist) unless the wheel is so new that
the match-mounting marks are still visible (and accurate), the question I
ask has never been asked by anyone to my knowledge.

The reason this question has never been asked is probably because it's an
engineering question, mostly theoretical, since you can mount the tire any
way you want and still balance it just fine with the proper equipment.

So I ask the THEORETICAL question only to learn more about tires.

Given that you can have manufacturers' red and yellow match mounting
balancing dots can be found at any location on the tire sidewall, which,
theoretically, is the "most balanced" tire (out of the box) when chosen out
of a large selection of tires?
a. When the red and yellow dots are at or near the same location
b. When the red and yellow dots are about 180 degrees apart
c. When the red and yellow dots are about 90 degrees apart

The troll is back. Please don't feed the troll.

This is yet another alias using the name of a quasi-famous individual, not military this time.