On Fri, 7 Apr 2017 07:26:47 -0400, "Jim Wilkins"
wrote:

"unk" wrote in message
news
On Fri, 07 Apr 2017 00:25:38 +0000, DoN. Nichols wrote:

On 2017-04-06, unk wrote:
I would like to be able to tell by colour if a screw has turned -
does
that exist?

Low-strength/removeable...

Maybe a kind of varnish?

A dot of fingernail polish on one side of the head and the
surrounding workpiece. No strength, but a clear indication if it
has
turned.

Enjoy,
DoN.



The problem is I can only see (easily) the threaded end of the
fastener,
and it's part-way down the through hole. The hole is stepped -
larger at
the eld I can see, but the screw does do project into the larger
section.

I want to put a drop in the well, and be able to look later to see
if the
screw has turned, so it has to stick to the screw and the hole and
change
colour if it's been broken.

Time for some experimentation...

It wouldn't be that hard to do but I haven't seen a commercial
product. Look into microencapsulation.
-jsw


Loctite 7414 tamper detection paste ?
http://tinyurl.com/m7le3vd

Dykem Cross Check - Torque Seal - Tamper Proof Indicator Paste?
https://www.applied.com/c-itw-dykem-83318/p/101406820
--
Cheers,

John B.