On 3/15/2017 12:08 PM, MM wrote:
Does the puller shown on the right in this Screwfix product look like
it's suitable to remove the flywheel on an old Suffolk Punch 35S
lawnmower engine?
http://www.screwfix.com/p/bearing-se...r-puller/19315

MM

Depends on whether it will get behind. The three legged type is another
option.

*Some* flywheels use an extractor tool which screws into the (threaded)
counterbore which the nut sits in. A bolt in this threaded sleeve then
bears down on the crankshaft.