On 22/02/2017 21:57, ss wrote:
Ok I dont have access to this, email from son.
They have an induction hob and the hob has been bonded to the work top
at either side. Apparently its not silicon.

Any ideas on how to loosen the bond to remove the hob.

My understanding is hob has a metal lip that attaches to the worktop at
the sides.
The worktop is granite. Any prising to release it would crack the glass
hob.

Warm it up with a hot air gun and see if it will soften...

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/