Thread
:
PTFEed Joints weeping
View Single Post
#
33
Posted to uk.d-i-y
DerbyBorn[_5_]
external usenet poster
Posts: 2,396
PTFEed Joints weeping
wrote in news:6e07a80c-d49f-477e-ba82-
:
On Tuesday, February 21, 2017 at 7:48:05 PM UTC, Chris Green wrote:
Well basic mistake one to my mind is using PTFE tape with compression
joints. PTFE and compression joints don't mix -
The apprentice uses it without thinking.
The journeyman avoids it without thinking.
The master uses it thoughtfully.
I've never had a problem with it.
It is slapping it onto the treads thinking it will improve the seal that is
so wrong. The thread is a clamping mechanism. The olive and cones do the
sealing. If these are clean then nothing else is needed. (Stand back for
the lubrication comments) Oil could be a good lube, but too often people
overtighten from the outset. Mauling a joint!
Reply With Quote
DerbyBorn[_5_]
View Public Profile
Find all posts by DerbyBorn[_5_]