On 1/31/17 9:25 PM, Ed Pawlowski wrote:
On 1/31/2017 8:10 PM, DerbyDad03 wrote:

A piece of MDF or plywood should work if you have a scrap laying
around.

It be the saw.

Here is the 1/2" MDF:

http://i.imgur.com/Sjicndm.jpg

I tried 2 different blades and I tried both with and without the
hold down clamp. The groove might be ever so slightly shallower
without the hold down clamp, but it's still there.

That sucks..I don't have a slider but is it common practice to stop
the blade while in the kerf?


Sometimes when you pull the blade back out of a cut, it will pull some
fuzz up on the top of the cut, or chip the top veneer of plywood or
melamine. So, it's a valid technique to stop the blade "in the cut."

It shouldn't do what's happening in his pics... certainly not for 6 bills.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply