On 2017/01/05 8:38 AM, amdx wrote:
On 1/5/2017 10:02 AM, Bob Engelhardt wrote:
I have a Heathkit IP-27 bench supply that I got at the dump. Its
problem is that the current limiter doesn't work due to a bad
transistor. Unfortunately, the transistor is a germanium one and
replacements are $30!

I found a forum post where the guy had substituted a silicon transistor
(TIP32C) and he said a germanium diode in the base circuit should also
be replaced with a silicon one.


My question is: why does the diode need
to be replaced?

Because the current limiting is partially determined by the
relationship between the voltage drops of the diode (0.3V) and the
emitter / base junction of the transistor.
If you change only the transistor to (0.6V) you will probably never
develop enough voltage on the transistor to start it conducting.

Mikek


Mikek, would replacing the germanium diode with a silicon one fix the
voltage drop you speak of?

John :-#)#



Here is the relevant part of the circuit diagram (transistor Q1 & diode
D7):
http://imgur.com/a/43wmd

Thanks,
Bob



--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."