View Single Post
  #41   Report Post  
Posted to rec.crafts.metalworking
[email protected] joe@powerplantconsulting.com is offline
external usenet poster
 
Posts: 1
Default Rigid Conduit vs Regular Iron pipe

On Sunday, March 3, 2013 at 9:12:58 AM UTC+7, Ned Simmons wrote:
On Sat, 02 Mar 2013 15:11:34 -0500, wrote:

On Sat, 02 Mar 2013 07:29:27 -0800, Pilgrim
wrote:



--

Thanks for your informative reply. What are the thread specs? Std NPT or
something else. The couplings I have seen for GRC seen to be non tapered.
Is GRC meant to be liquid tight to prevent moisture entering?
Thanks

CP

GRC uses a NPS thread, not NPT (National Pipe Straight) not (National
Pipe Tapered)


I think this misunderstanding has been repeated here several times.
The threads on the ends of rigid conduit are tapered pipe threads.
Female threads on conduit fittings are often straight threads.

Per Wheatland:
"Wheatlands Galvanized steel Rigid Metal Conduit
(RMC) is manufactured in accordance with the latest
specifications and standards of ANSIĀ® C80.1, UL-6,
and federal specification WW-C-581. The pitch of
RMC threads conforms to the American National
Standard for Pipe Threads, General Purpose (Inch),
ANSI/ASME B1.20.1. The taper of threads is 3/4 inch
per foot (1 in 16). "
Ned, Contractor has brought steel tubing manufactured according to ASTM A53 (grade A) and buried it in concrete as electrical rigid conduit. Rigid conduit comes according to ANSI C-80.1


Can this steel pipe installed be threaded or made compatible with "real" ERSC pipe?

My email is


Please help if you can.
From NFPA 70 - 2008:
"344.28 Reaming and Threading. All cut ends shall be
reamed or otherwise finished to remove rough edges.
Where conduit is threaded in the field, a standard cutting
die with a 1 in 16taper (3/4-in. taper per foot) shall be used.
FPN: See ANSI/ASME B.1.20.1-1983, Standard for Pipe
Threads, General Purpose (Inch)."

--
Ned Simmons