DIYbanter - View Single Post

(alessandro) wrote in message . com...
Can anyone tell me what fault code F7 means in a GE oven, model JTP15
B0W1BB? The code (and anoying beep) came on when the oven was not in
use (and had not even been on for weeks!). It stops if I hit the
clear botton, but starts over after a few seconds. Many thanks in
advance.
Alessandro

Hi,

I got JTP15BD1BB & JTP15BA1BB to work for me.

Built in oven?

A few F7 codes....
F0 or F7 - Shorted Clear/Off Key due to membrane switch, control or
connector - Shorted key panel membrane switch; Check Electronic Range
Control (ERC)

F7 - A = Function pad button stuck or B = Bad clock Unstick button or
- Replace Electronic Range Control (ERC)

F0, F1, F7 - Stuck keypad may mean relay is turned on. - Determine if
problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32
seconds to see if Code recurs
If code recurs, problem is in the control. Replace control.
If code does not recur, problem is with the Key Panel.

jeff.

Appliance Repair Aid
http://www.applianceaid.com/