You absolutely need to

1) add insulation in the attic--bring it up to at least 6"-8". More
cellulose is ok, or you could place unfaced fiberglass batts on top of the
existing stuff.

2) cool the attic off

If your AC is running as you describe, you are going to really bleed.

Now, if you increase insulation without more ventilation, attic temps are
going to really shoot up. Right now much of that heat is coming down into
the house to be air-conditioned away. You probably can't add soffit vents
unless you have eave overhangs--do you? If so, then put in soffit vents and
vents in the roof itself near the ridge. The best venting is continuous
ridge venting but unless you are replacing the roof, it is cheaper and less
work to put in the kind with a hood over them that just require you to cut a
hole in the roof here and there. You would need about 4 or 5 of these vents
I'm guessing, spaced along the ridge or ridges. A well-ventilated attic
won't go much above 100 degrees no matter what. I'm guessing you have attic
temps of 160 plus on hot days, or you will once you add insulation.

If soffit vents are not an option, then at least put a good-sized vent in
each gable end. If you can put some lower down (you mentioned sidewalls),
that would be good. A combination of vents in the gable ends and vents
along the ridge should help attic temperatures quite a bit. A bigger fan
would also help--8" is pretty insignificant.

This project will definitely pay for itself in a few years thru decreased
utility bills (and increased comfort).


"Painter" wrote in message
...
Just moved to Houston TX this week to an inherited house. Wonderfully hot
place this early in the year. AC runs 24 hrs, we're already afraid of the
first electric bill. No wonder they wanted a $400 deposit.

Our attic has an 8" thermo-type roof exhaust fan that is set to come on at
140F. My wife says this usually happens about 11AM. Even with the AC on
and
set to 74F, she says the house is unbearably hot during the day, never
getting below 84F.

From what I've been told after asking around, this house is what some call
"Dutch construction," meaning there are no soffit vents of any kind (among
other things). There are no attic vents other than a triangular louvre at
one
end of the house - the end closest to the exhaust fan.

The attic is about 1700 SF. I have no idea what the RPM/CFM exhaust of the
attic roof fan is, and there is no legible mfr ID on the fan.

The attic insulation seems to be the cellulose type stuff at a depth of
about
2".

My question is, what do I do to cool us further? Would adding some
sidewall
vents farther away from the fan help the airflow? Small vents, like the
6x8
panels at Lowe's/HD? Or is a very large additonal exhaust fan in order?
Should I add more insulation? I'm really just stabbing in the dark here...

Painter