View Single Post
  #3   Report Post  
MrManuals
 
Posts: n/a
Default Apple Studio Display 21inch(19.8) fault

Hi,
This parts and service manual is available for 10.50 payable through
Paypal to .
Once we receive notification of payment, I'll send you a link in
email to download the file automagically. You will have your manual
within 8 hours, but more likely within 1 hour.
We can also take Visa / MC

Regards;




On Wed, 14 Jul 2004 22:01:27 -0400, Andy Cuffe
wrote:

On Wed, 14 Jul 2004 19:19:26 +0200, Jean-Yves
wrote:

In article ,
Andrew Tweddle wrote:

I have one of these machines (its really a SONY inside, no idea which
model). Anyway the fault is it turns off after 2 seconds when connected
to a PC. I have found one dying cap CP78 on the power supply board, but
can't seem to make much headway.
The second question is, does this model work in normal operation on the
PC 640*480 VGA mode or did Apple not allow this in this model. The Apple
data sheet isn't particularly explicit.

Thanks Andrew


this unit supports other resolutions than 640x480
but you need a computer which supports multiple frequencies monitors

on (very) old macs, this display is black.
does it turn really off or does only the led comes yellow after 2 secs ?
if it is, it's probably not a power supply fault, but a logic (video
fault) as the monitor detects the video and comes green only if it has
video it can display.

dont know also which sony model it is..


This monitor uses a sony CRT, but was designed by apple. I don't
think there's any way to get a schematic of it. Apple only supplies
enough information for board swapping.
Andy Cuffe