View Single Post
  #7   Report Post  
Stephan Greppi
 
Posts: n/a
Default Problem with vertical sweep on Toshiba CF2665K TV Set -FIXED -

I finally figured out what the problem was.
I had purchased a repair kit from Tritronics fot that TV, and the
instructions said to replace C301 and C305 with 2.2 MF (instead of the
original 1.0MF), which I faithfully did.
Turns out these 2 caps were indeed leaking, but they should be replaced by
1.0 MF and not 2.2MF.
Anyway it's fixed now, and even though I changed 8 caps, a few diodes and
the IC301 for nothing, it still was well worth it.
Thanks for the help.
Stephan



"Stephan Greppi" wrote in message
news:%kCnc.16725$xw3.1130314@attbi_s04...
Hi,
I replaced all electrolytic capacitors Cxxx I could find. I don't have a
schematic, but I guess C3xx are capacitors in the vertical deflection
circuitry.
I also changed IC301, R287 and a couple diodes.
The result is still the same. It started by the top of the picture

starting
to elongate, and then the picture progresively diminushing in size over a
few weeks. It is now about half the size of a normal picture, in the

middle
of the screen, with retrace lines visible when no RF signal is present.
What else should I try before I trash the TV?
Suggestions anyone?
Thaks in advance.
Stephan



"David" wrote in message
...
Replace all the capacitors with the same first number as the vertical

output
ic. i.e. vertical output ic IC301, replace C301,C305,C308 and maybe a
couple more.


"Stephan Greppi" wrote in message
news:GIlic.14904$_L6.1153842@attbi_s53...
I have aToshiba CF2665K that is experiencing vertical sweep problem

(about
half the vertical picture with retrace lines).
This has been worsening slowly, and I'm pretty sure it's a defective
capacitor somewhere in the vertical circuitry.
The problem is I cannot find the schematic anymore.
Would anybody have a schematic for this TV, so I can locate the

capacitors
?
Thanks
Stephan