Considering the set, I would have spent my money on a descent name brand set
in the first place. Most of the time, the parts are not available for this
set type, and they change the complete PCB at a very high cost. At today's
prices, you can get a much better set for about $800 to $1000. Check out
the Sony and Panasonic sets. These are excellent value for the money spent.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Ampdoc" wrote in message
news You need a flyback transformer, horizontal output and damper diode. I do not
know if they are available as parts from Loewe, you may have to go with
replacing the main PCB. I will check monday and see if you can get just the
parts. I've been working in the Memphis area and have seen 3 sets with this
problem, however we replaced the main Bd. as they were under warranty. If
the parts are available it should not be so expensive this time. Where are
you located?


--
Jammy Harbin
J & J Electronics, Inc.
227 S. 4th St.
Selmer, TN 38375
731-645-3311
"Joe Trubisz" wrote in message
om...
Hi...

I have a Loewe Aconda and about a year ago, I got a obvious sparking
that I could see from the top of the set through the vents.

Called the service repair guy and for $800, he replaced the chassis
and it worked fine again.

Well..guess what...same thing again.

Is this some sort of known fault with Loewe TV's or am I set to
spend another $800 bucks to get it fixed again??

Or...should I just give up and buy a new TV?

Suggestions/comments appreciated.

Thanks in advance,
Joe