Central Heating question
Mike Hibbert wrote:
______
Hello,
I have just pulled out the wiring diagram for the boiler and it looks
ok actually. I simply (!) need top wire in the live, switched live
and neutral from the stat and then remove a link between the live and
switched live points.
___
A / B-/\//\- C (room stat)
| | |
| | |
1 2 3 (control board)
\___/
Where A is live
B is switched live
C is Neutral
and the link beween 1 & 2 is to be removed
Cheers for the advice!
Mike
Should be a piece of cake then! As others have suggested, If you use a
wireless programmable stat you will need virtually no wiring and will also
be able to have different temperatures (or switch off completely) at
different times of day - even if you don't currently have a timeswitch in
the system.
--
Cheers,
Set Square
______
Please reply to newsgroup. Reply address is Black Hole!
|