On Wed, 24 Mar 2004 00:00:39 GMT, "Dave" wrote:

Thanks, I appreciate the concern.

I've left the tv unplugged since this morning for that very reason. Is it
not wise to assume that ~12 hours will drain pretty much everything in a
standard tv?

Dave

Dave,

Don't remove the black suction cup with hot pink wire on the CRT
itself.

The L14401 is between base pin of horizontal (Q14401) transistor and
the horizontal driver transformer (grey or black).

The guys forgot to tell you to remove glue, they mean completely after
removing the coil. This means stripping glue from the coil with
finger nails and unclog one hole where coil lead goes through with
piece of wire.

To make things go easier, get wires out of plastic bow-tie holders,
unplug the speaker wires also unplug input wires on the upright board.
Remember how wires are put in this way and reinstall all wires in
original places after the repair. Still need to unplug the two
(vertical and horizontal plugs) plugs on the CRT yoke and gently get
the wires out of CRT yoke wire holders.

These white connectors is latched, Gently lift the "hoop" and work
plug out of it's socket.

I like these CTC203, good so far.

Cheers,

Wizard