Thread
:
tek 465b scope problem
View Single Post
#
2
Sam Goldwasser
Posts: n/a
tek 465b scope problem
(Aaron Kentucky) writes:
Hi,
I'm relatively new to electronics...
I've got a tek 465b that has been working fine for about 8 months.
The other day without any sort of warning the crt failed to come on
when I started it. It still triggers, but I see nothing even when I
press the beam find button. I also happen to have another 465b from a
sour ebay transaction which has no horiz scan.
Is it beyond the capability of someone like myself to swap the crt
following some careful instructions? I know there are high voltages
involved.
Is it worth it to have a professional do this or should I just forget
about the old scope and consider buying something new? I'm starting
to realize that ebay may not be the best place for scopes...
It's probably not a bad CRT but an electronic problem like the HV power
supply..
--- sam | Sci.Electronics.Repair FAQ Home Page:
http://www.repairfaq.org/
Repair | Main Table of Contents:
http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ:
http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info:
http://www.repairfaq.org/REPAIR/F_mirror.html
Important: The email address in this message header may no longer work. To
contact me, please use the feedback form on the S.E.R FAQ Web sites.
Reply With Quote