Wood Movement: Is this a typo?
On 8/20/2016 2:56 PM, steve robinson wrote:
Snip
Sloppier in what respect?
There's enough play in the biscuit slots, and enough variability
in the thickness of individual biscuits, to allow for noticeable
misalignment in an edge-to-edge glue-up, enough to leave a ridge
that's too big to remove with just a few passes with a card
scraper. I found that I can get better alignment, faster, without
the biscuits.
Then your either using wrong sized biscuits , wrong size blade the
machine incorrectly or the machine has a fault .
I think you just about covered every thing that can happen when you use
a plate joiner. Pretty observant, you are.
|