My set KV34MN11 also have same CLICKing problem, no screen & sound when
power on. Can i try the same solution? Pls help, thks in advance.


Lenny" wrote in message
om...
Thanks to everyone for the advice. I'm ordering the A version today
and then I'll dive back in. Best regards, Lenny Stein, Barlen
Electronics.

(Tim Marcus) wrote in message
. com...
TELEVISION
SONY
KV27EXR25
DEAD?CLICKING NOISE, B TOO HIGH
CHECK R673 4.7 FOR OPEN

TELEVISION
SONY
KV27EXR25
DEAD, CLICKS, SWITCHING XFMR HAS NO POWER OUT-BOARD G
REPLACE IC651 STRS6301, R656 560, Q611 2SC3311A

I have repaired several of these - first I swap out the str regulator,
which is almost always bad. Then take care of the cold joints. If that
does not do it one of these 2 tips probably will. best of luck - Tim

"Sofie" wrote in message
...
RonKZ650:

I think we will all be interested in your future posting with the
comparison
testing results.

"Running too hot" has NEVER been an issue with the $7 "generic" or
rather,
after market replacements I get from my jobber. 100% OK.

The markings on the replacement chips that I have always obtained from
my
jobber @ $7 appear to be the same as the more expensive Sony supplied
chips.... it looks to me like the SAME manufacturer and almost
definitely
NOT some cheapo Hong Kong, inferior, rip-off.with obvious cosmetic
challenges that we are all familiar with.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


"RonKZ650" wrote in message
...
Yes, but is there a difference in the "Sony A" for $30 or the
"generic A"
for
$7? I'm going to find out next Sony I work on. The last 2 generics I
replaced
were running over 160 degrees F. I think that's really too hot. I'm
anxious to
compare the original Sony. Sony still sells both the STRS6301 and
6301A as
a
different part number.
Ron