Router Template Guide Bushings - Why So Many Sizes?
On 7/30/2016 11:47 PM, whit3rd wrote:
On Saturday, July 30, 2016 at 9:11:39 PM UTC-7, Leon wrote:
On 7/30/2016 4:09 PM, whit3rd wrote:
For making sliding-dovetail slots, one requires a guide jig.
Actually I made sliding DT joints with my router table and fence. No jig.
I'm making dovetail slots across a 7' board, for tall bookshelves. Can't
get it accurate enough on the router table,
Well there you only need a straight edge guide, I don't see the need for
a guide bushing. The guide can be a hunk of plywood.
clamping a guide works. Biggest
problem, is getting it clamped without interfering with router movement.
As stated above, use a large enough piece of plywood as a strait edge guide.
|