On Wed, 29 Jun 2016 06:27:09 -0500, "Lloyd E. Sponenburgh"
lloydspinsidemindspring.com wrote:

Gunner Asch fired this volley in
:


Of all the vfds I've replaced...only one could be found that was
caused by a shorted motor. Most VFDs (NOT ALL) have internal
protections that shut the VFD down if the motor fails.


Besides... no body reads details... they just see "blown up" and presume
their own conditions.

1) the spindle ran fine on the last job, and was stopped properly before
turning off the machine.
2) on the FIRST power-up of the VFD - BEFORE ATTEMPTING TO START THE
SPINDLE - the VFD threw the fault indicated earlier. No amount of
resetting, either by keypad or application/removal of power will clear
the fault.

Oh... and Gunner...
3) ShopSabre says they'll be switching over to Mitsubishi VFDs on all new
machines. If you need a new VFD, you can purchase an entire controller
upgrade, and they'll sell you a Mits to go along with it.

Not terribly sure Mits is the way to go..but they may have improved
them a Bunch. They probably got a really good deal on em.
Manufacturing/industrial economy is tanking...shrug.

For me that means FOR SURE that I'm ripping the guts out of this toy and
putting in a decent control (and servos, I think).

There are lots of other things to do to it, also... like screw covers (of
which it has NONE). Like providing more hold-down inlets under the table
(only 4 in a 5x10 deck). Like making the hold-down grid board user-
replaceable. (It doesn't even come with a routing file to cut a new one,
and they sealed over all the screw pockets, so it requires destroying the
old sheet to get it off!)

It does have a nice, rigid table structure, though! G (The gantry, not
so much!)

Oh, well, I wanted to add a 5th axis to this thing, anyway.


LLoyd

Sounds like a FUN project!

Anybody want a CNC mill do do that with...let me know TODAY..Ive got a
Sharnoa CNC mill, 40 taper with a Tiger control on it..supposed to
work but needs the keyboard..which may be a bitch to find..so doing a
retrofit would be the nads. NICE machine!

https://picasaweb.google.com/1040422...47228241195714

Want it for free? I can probably hold it for that long. Located in
Santa Ana California. But speak before Friday!!


Gunner



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus