"Christian McArdle" wrote in message
. net...
When I get to doing the kitchen here It'll have below worktop
unswitched sockets for appliances fed from a grid switch panel
fitted with 20A DP switches in the room, fuses for each socket
also mounted in the grid, I think not thought to hard about
this yet...
This is what I did, except there is no need for fuses in the grid switch.
It
is better to have only the fuse in the plug top. The grid switch is fed
from
a dedicated 32A 6mm radial and feeds only a w/m, d/w and t/d.
Christian.
So if the fuse blows you have to drag out an integrated appliance. If it is
fitted correctly the socket should be accessible.
---
--
Checked by AVG anti-virus system (
http://www.grisoft.com).
Version: 6.0.542 / Virus Database: 336 - Release Date: 18/11/2003