Try visiting Howard Sams website.
http://www.samswebsite.com/photofact/pf_search.asp

I didn't see your model listed, but you may e-mail them to inquire if they
can get or have info on a similar chassis.

I also believe Sears picked up some responsibility for some Wards maint
contracts, but not sure if TVs were included. Didn't find any info on Sears
site.

"Nocturnal1" wrote in message
...
Hi all,
I have my Mom's not too old 20" TV which is a Wards Signature 2000 model
JSJ12022 Suffix A. It is probably a victim of a lightning hit. I can see a
burned diode on the board - so burned, in fact, that the solder has melted
on the other side of the board on the diode leads and leads to a couple
caps
and resistors near it. I have the owner's manual - but there is no
schematic
in it. An exhaustive search of the net reveals nothing - not even a source
of any Wards service info that I could take this to. I know the unit was
built by SHARP in Sept 1994. It was distributed by JRI Distributing, Inc;
619 West Chicago Ave, Chicago 60671. I seriously doubt if JRI has
servicing
info, tho. Probably just some guy who rented a warehouse back then. The
main
board has numbers: (P8269PE) and PWBF8269PE and also DUNTK8269WE and also
8269V3. I searched on all these numbers on the net. The only results I
could
find in my search were that Wards is defunct. bankrupt, and any service
agreements are taken in the shorts...

The problem:
The burned diode is D752, with scorched areas at C725 and R754. I don't
want
to just stick in "any" diode and plug it in, of course.. The set does not
come on - I hear a click after the power switch is pushed but nothing
else.
Nothing else is burning - the damage is complete. Does anyone have a
service
manual or a Sams Photofact number for this TV?

~Tom in Mn
nocone (at uslink) (--dot--) net