View Single Post
  #2   Report Post  
Posted to sci.electronics.repair
Jeff Liebermann Jeff Liebermann is offline
external usenet poster
 
Posts: 4,045
Default STUPID QUESTION No. 5

On Wed, 18 May 2016 17:35:48 -0700 (PDT), wrote:

A white roll of this for canoe/kayak roof rack covers is in the garage. Trying this with a non toxic glue and a precise edge inking method.
UV Resistant Flagcloth Uncoated Oxford
3.5 oz. per sq yd. UV Resistant 200 Denier. Water repellent finish and superior ultraviolet resistance. The use of high tenacity yarns makes an attractive fabric, while maintaining even dye appearance and good screen printing capabilities.
Uses: Flags, Banners, Jackets, Bags, Tents, Stuff Sacks
http://www.seattlefabrics.com/nylons.html#UV Resistant Flagcloth Uncoated Oxford

Not available in camouflage pattern. Find another supplier or just
use a plastic camouflage tarp:
http://www.harborfreight.com/9-ft-6-inch-x-7-ft-4-inch-camouflage-tarp-46411.html
Incidentally, the camouflage pattern is not to hide your
kayak/recumbent from oportunistic thieves, but rather to hide your
sloppy workmanship from sewing critics. Beware... they're everywhere.

If this is suppose to act as a kayak/recumbent cover while it's on the
vehicle, you're going to need something that is rip-stop and possibly
reinforced. It's almost certain that you're going to snag it on a
tree branch at some point. With un-reinforced or non rip stop weaves,
the "wind" will expand a tear to the full length of the cover.

Also, you'll need a glue that's made for fabric that's not going to
melt in the sun or turn to concrete when cold. Look for "waterproof
fabric glue" or "heat set fabric adhesive".
http://www.bostik.co.uk/diy/product/bostik/Sew-Simple-/266
https://www.youtube.com/watch?v=4sTLMon9B64
https://www.google.com/search?q=fabric+glue
Common hot melt glue will suffice (barely) as long as it's flexible.
If it dries hard, it will crack, crumble, and fall apart. If all you
want is a waterproof seam, just some rubberized latex or heat set
glue, plus a double or triple needle seam. Plan on wasting some
material learning how to do this. Also, test the glue (after it sets)
in the fridge or deep freeze to see what happens when it gets cold.



--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558