On Monday, April 25, 2016 at 10:48:10 AM UTC-4, N_Cook wrote:
It seems the plastic housing has deformed to slightly oval tubes or
something, but no rechargeable AA size batteries (2x2) comfortably slide
in and out. Had to cut in from the side to make an access point to lever
out the 2 deeper AAs, wedged in ther, no corrossion , just lack of
freeboard. Any ideas how to enlarge the bores a bit, no engineering
reamer available. Those silly sandpaper cylinders on a rubber cylinder
"mandrel" for "Dremmels" would do the job if there was a way to extend
the shaft. I'll try the core of a "choc block" connector as a coupler,
but any other ideas?
http://www.mcmaster.com/#grinding-bits/=12ed2ml
such bits as metal grinding carbides are essential for rust maintenance.