Thread
:
Cap testing question
View Single Post
#
3
Posted to sci.electronics.repair
Randy Day[_2_]
external usenet poster
Posts: 29
Cap testing question
In article ,
says...
I have a computer that won't turn on unless it is warm enough. The
problem is in the power supply. If I use a blow drier to blow some
Bad caps are certainly one possibility,
but there are other things to check for
as well.
There could be a cold solder joint that
makes contact when a lead expands with
heat.
A connector may have a bit of corrosion
that slips away when the metal contacts
slide past each other under heating.
Try disconnecting and reseating all
connectors.
Intermittent issues like these can be
a pain to diagnose...
---
news://freenews.netfront.net/
- complaints:
---
Reply With Quote
Randy Day[_2_]
View Public Profile
Find all posts by Randy Day[_2_]