Thread: Fluke 8060a meter interconnect strip
View Single Post
  #17   Report Post  
Posted to sci.electronics.repair
Ralph Mowery Ralph Mowery is offline
external usenet poster
  
Posts: 4,228
Default Fluke 8060a meter interconnect strip
In article ,
says...

I would try detergent and water first, followed by a distilled or
deoinized water rinse. If that fails, start up the ladder of
chlorinated hydrocarbon solvents, starting with alcohol. I wouldn't
go much past trichlorethane or trichlorethylene which will probably
peel off the PCB printing, labels, and maybe the silk screening. Some
of these will also attack the epoxy that holds the PCB together. Be
careful and good luck.


I have seen references to mixing IPA and acetone 50/50 to do some PC
board cleaning. Any thing good or bad about doing that ?




Reply With QuoteReply With Quote