Philips 3A chasis service mode?
"eddumweer" kirjoitti
...
"timppa" schreef in bericht
...
Thanks!
I managed to get to serv.mode now.
It needed that mono button and timer/sleep button sametime.
Now I have menu which looks like this.
Center of screen:
-- --
I managed to change mem blocks.
Those look like this:
01 39
02 20
03 08
04 01
05 42
06 14
07 39
08 --
09 --
10 --
11 --
12 --
13 --
14--
I can also cnahge values, but how I can store those? I haven't found
correct
mem block and value for channeselector, but still looking for it...
I thought that the value for the channelselector must be in 12 or higher
and
depending the hardware (channelselector, txt.... ) the value must be 040
or
40.
Thanks for information!
Only value that is changed over memblock 7 is 11. 12 cannot be changed or
something is broken.
I have to look for that pp button (code) because I use CME replacement
remote that don't have such...
Bit hard.
If I manage to change and find correct channel selector value I will install
those zeners.
This tv model is not very service friendly... at all.
Store everything you change "directly" with the pp-button (personal
setting)
or green button at the top of the rc5991
Have you mounted 2 zenerdiodes 5V6 fover the eeprom from ground to sda and
from ground to scl. It's a modification for static problems made by
Philips
Greetings Peter
|