Circuit breaker box hisses
On Sat, 17 Oct 2015 00:08:21 -0400, "Ralph Mowery"
wrote:
wrote in message
.. .
A properly soldered connection is still better than an improperly
crimped connection. Soldered connections should be re-enforced with
heat shrink tupe beyond the solder-stiffened area of the wire.
But the proper crimped connection is a lot berter than an improperly
soldered connectiion.
You are defeating the purpose when not doing things the correct way.
But the "properly crimped connection" is not made with a $3.00
crimping tool and an insulated butt crimp connector consisting of a
tinned copper tube and a hard plastic sleeve on it. A properly crimped
connector requires a crimper with the correct size die for the
connector, and a "calibrated" pressure, to ensure a "gas tite"
connection - and an insulating sleeve that seals to the insulation,
keeping moisture and other corrosive contamination away from the
joint.
It is easier for a reasonably competent craftsman to make a decent
soldered joint with tools at hand than to do a "proper" crimp without
the specialized tools required.
That said, a "proper" crimped connection IS the preferred method of
joining flexible conductors.
|