J Burns wrote:
On 4/22/15 8:26 AM, Stormin Mormon wrote:
On 4/22/2015 2:13 AM, Danny D. wrote:

Have you ever dealt with a dirty water pump that just wouldn't
drain the last few inches? Is there a simple solution?


I modified a HF fountain pump by taping off the
sides, so it would draw closer to the floor of
the wet area. Wonder if you can modify this pump?

The shovel routine sounds a bit like work. Others
suggested a shop vac. When the shop vac is full,
you can put the pump into the shop vac canister.

Instead of running for the GFCI unplug, just let
the float down. Might want to put the pump in a
Rubbermaid with enough room for the float to move,
while you shovel water into the 18 gallon Rubbermaid.

http://www.amazon.com/Wayne-Systems-VIP50-Submersible-Utility/dp/B000CQ6CU4/ref=sr_1_10?ie=UTF8&qid=1429875701&sr=8-10&keywords=trash+pump

Needs only 1/8". 2500gph through a garden hose.

"Minimum water level to operate pump is 2 5/8-inch"