On Sun, 09 Aug 2015 14:46:00 -0700, Larry Jaques
wrote:

On Sun, 09 Aug 2015 10:18:18 -0700, Gunner Asch
wrote:

On Sun, 09 Aug 2015 06:32:02 -0700, Larry Jaques
wrote:

On Sun, 9 Aug 2015 04:05:40 -0700 (PDT), Sue
wrote:

On Saturday, December 31, 2011 at 4:43:08 PM UTC-5, Steve B wrote:
I have noticed there are two types of cutters for sheet metal. One a
nibbler, one a shear.

The one nibbler I see apparently cuts out small pieces, almost circles, and
imagine that would be for very fine work. The other "nibbler" has two
blades that are about 3/4" long that go up and down, pinching and shearing
the metal.

The third is a shear, much like a pair of electrified scissors.

A brief description of each and its use would be appreciated. When it comes
down to it, I will probably need all three for various stuff.

And lastly, I see some run on air. If one has a good compressor, is there
any important differences between the electric and air models?

This is going to run a few bucks, so wanted to ask first.

And is buying refurbished worth the savings or not? Problems later vs: new?

Steve

Hi Steve,

You should check out this video on youtube https://youtu.be/M2ceCfijw-0
Beverly Shear B1
It's the best bench top sheet metal shear I've seen. Expensive and tough to find, but very versatile!

Does anyone have any experience with the HF version of the Beverly?
It's just $139 on sale right now.

I've been enamored of the Beverly for decades now, having used one
once, in another life.

They are not bad. Need a Beverly? I find them every now and then.

Yes, grab one for me (cheap to free) for the next trip, please!
Next year?


Gunner, who hopes your trip home went well.

It did. Nobody stole anything out of the back of the truck, and only
one bucket overturned, spilling cutoff material all over the floor of
the bed. Luckily, it was all larger than the gap at the tailgate, or
I would have had a major lawsuit on my hands as small pieces of steel
bounced into windshields and punctured tires all along I-5. g

Couldn't find a 1" micrometer or the odd pair of parallels, eh?
Oh, and you didn't even mention the Current Project Trailer. bseg

Oh ****...sorry about that. I couldnt find your various
emails..missed the micrometer(s) and parallels.

Those however I can ship cheaply. Crom knows Ive got enough
mics..though am short on extra parallels

https://picasaweb.google.com/1040422...2602/Metrology

Anything else in the above link you need?