Advice needed for sliding door project run amok
On 3/15/2015 12:56 PM, dpb wrote:
On 03/14/2015 6:59 PM, Lew Hodgett wrote:
"Dick Snyder" wrote:
The plywood I made the doors from was the wrong choice.
-----------------------------------------
As others have suggested with 1/4" plywood, you can't get
there from here in this application.
IMHO, you have the following choices:
1/4" hardboard, two sides good and painted.
...
Veneer it is the other choice to retain the original cherry look.
--
I may do the hardboard as a second choice. First choice right now is
smoked acrylic glass. I will have to give up on the cherry doors but my
daughter (the recipient) is OK with that.
|