In article ,
Robert Baer wrote:

Jasen Betts wrote:
On 2015-04-03, Robert wrote:

Am looking for manufacturer of an unusual terminal/connector block.
As examples of what i am NOT looking for a
1) The "standard" type that "everyone" seems to make - see
PhoenixTerminalBlock.JPG; objection here is that the wire is held down
by a screw clamp.
2) The closest to what i am looking for is similar to the garden variety
wall outlet where the wire is pushed in and held by a spring-loaded
clamp (slot available to release the clamp).

What i am looking for is similar to the Phoenix, but the wire clamp
mechanism is like a lever; lift up, then push in stripped wire, then
push down to clamp; it seems to latch in that position as it is damn
near impossible to lift enough to release the wire.

Suggestions?


I had some like that, with a 2 position lever, I think by "WAGO"

Damn! Found Wago, saw their DIN-type blocks, but no drawings or
close-up pics for detail.

Maybe something like this
https://eshop.wago.com/JPBC/0_5Start...B42305D00E7095
733C092E4B2ECE3?supplierAID=222-415&catalogID=WAGO01&zone=7

A bit long link, but it goes WAGO online catalog.

Have fun :-)



Sammy