bud-- wrote:


As explained in the IEEE surge guide
(starting page 30) plug-in protectors work primarily by limiting the
voltage from each wire to the ground at the protector.

** Connecting MOVs to ground like that in a *plug-in device* is prohibited on safety grounds under EU and similar regulations as followed in most 230/240 V places - like Australia where I am.

MOVs either have or can develop after some use leakage currents well in excess of the maximum permitted, which is only a milliamp or so for most categories of appliances.

The only components that may be so connected are agency approved " Y caps " with values like 4.7nF - while MOVs and " X caps" always go across the line.



.... Phil