View Single Post
  #14   Report Post  
Posted to sci.electronics.repair
JW JW is offline
external usenet poster
 
Posts: 519
Default IDE Extension Cable for 2.5 inch Hard Drive

On Fri, 10 Apr 2015 08:25:41 +0000 wrote in Message
id: :


Most important, the extension cable must have a male connector on
one end, and female on the other.

Does anyone know a source?

http://notebookcables.stores.yahoo.net/544pinidelap1.html
http://ja.aliexpress.com/item/IDE-44Pin-Cable-2-5-Laptop-hard-drive-Female-To-Male-Cable-8inch/309780041.html
http://www.ebay.com/itm/2-5-IDE-44-Pin-laptop-HDD-Male-to-Female-Cable-2-inch-44-pin-M-F-cable-/180766687148
http://www.ebay.ie/itm/New-44-PIN-IDE-2-5-Hard-Drive-Cable-Adapter-Male-to-Female-5cm-Amiga-Laptop-/281426634750?pt=LH_DefaultDomain_205&hash=item4186 55a7fe
http://www.iec.net/l1354.html
etc... etc... etc...


Hi Jeff,

UPDATE:

Thanks to you, I just ordered the cable from notebookcables....

Regards, John


WARNING/CAUTION:

I received the cable in the mail late yesterday. This "extension"
cable is DEFECTIVE.

The connectors are "out of phase". The top row of pin connectors
on the female side are connected to the bottom row of pin connectors
on the male side, and vise versa.

Note: If you "flip" the 2.5 inch hard drive, Pin #1 will end up
connecting to Pin #20, etc.

This cable came from Atlantic ComputerTech, 95 Horton Ave.,
Lynbrook, NY 11563.

I will call them after 8AM (now 7:25AM) about returning this cable
for a refund. I am afraid that all their cables may have the same problem.

If I have a problem getting a refund, I will report back.

John


This is not surprising - see my response to Jeff L. I think if you used
two of them for a total of three flat cables connected together, it may
work.

You don't want exceed a total length of 18" as that would exceed the
specification, so keep that in mind as well.
http://en.wikipedia.org/wiki/Parallel_ATA