On 27/02/2015 5:09 PM, Phil Allison wrote:
Trevor Wilson wrote:
Phil Allison wrote:
Anyway, I fitted some Polyswitches to both tweeters. Just in case.
** I hope you know to fit those Polyswitches in series with the high
pass filter and not the coils of the tweeters.
OTHERWISE, if the device ever trips, the HPF becomes a series tuned
circuit and shorts the amplifier at or near the x-over frequency.
**Thanks for the tip. And yes, I always fit them ahead of the HPF.
** So you saw my letter on the topic in Silicon Chip, back in the 1980s ??
**Very possibly.
BTW One tiny Polyswitch sure is *cheap insurance* for such an expensive driver.
****** yeah. The distributor reckons that the real price was more than a
grand. Still, the thing sounds remarkably good for a moving coil speaker
system. The cabinet is very well damped, with lots of bracing and driver
integration is very well implemented.
--
Trevor Wilson
www.rageaudio.com.au
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com