Thread: It mows
View Single Post
  #54   Report Post  
Posted to rec.crafts.metalworking
Larry Jaques[_4_] Larry Jaques[_4_] is offline
external usenet poster
 
Posts: 9,025
Default It mows

On Mon, 18 May 2015 22:27:13 -0500, "Terry Coombs"
wrote:

dpb wrote:
On 05/18/2015 8:32 AM, Terry Coombs wrote:
...

... I'm not sure what pressure I've got in the tires right
now , but probably too much. Less pressure , especially on the rear
, means more tread in contact with the ground and that might be part
of my traction problems.


W/o looking at the spec, I'll bet about 14 psi will be recommended.

Even more significant will be adding some weight if you're pulling
something...


During the icy season I had a board laying across the fenders under the
seat with a 70 lb bag of sand on each side . The fenders weren't quite wide
enough ... with the added weight and the chains , I was able to clear our
road to the highway so everybody down here could get out . What I need is a
couple of 2-3" thick steel rounds I could bolt to the wheels . Bet it
wouldn't spin then !


POP! And oh-so-easy to R&R, eh?

Are you using chains in the ice/snow?

--
When we are planning for posterity, we ought
to remember that virtue is not hereditary.
-- Thomas Paine

(comparing Paine to the current CONgress deep sigh)