On Fri, 10 Apr 2015 02:57:10 +0000 (UTC), Ian Malcolm wrote:
robobass wrote in
:

When the family makes a road trip I bring along a 12v 4 amp cooler.
The ciggie plug melted long ago and I wired up one of those 3/16"
cannon shaped connectors used for low voltage home stuff like laptops,
external HDs etc. It also gets very hot and is starting to melt.
What's a good off-the-shelf solution which doesn't take up much room?
The whole ciggie plug thing is the dumbest convention ever, I must
say. I can't believe it's still extant.

A good quality cigarette plug connector in a clean good quality socket
can handle 8 to 10 amps without problems. I have a 100W inverter that
has one and has never given any trouble. However, it needs to have a
body that's held together properly with several screws, preferably a four
sided negative spring contact and a positive contact made out of plated
machined brass, not pressed steel. If the socket has actually been used
for a cigarette lighter, its basically trashed by the heat and ash and
will never be reliable.

Has anyone here used -- or even seen -- a pair of "cigarette lighter"
plugs wired together and sold as a "jumper cable"? The concept certainly
has appeal -- battery-to-battery jumper cables are heavy, bulky, and
stiff -- but how would it handle the (say) 100A "cranking current" needed
to get an automobile with a dead battery started? Ian's "8-10A", which is
an order of magnitude lower, seems like a good working figure for that
kind of connection, and with that limitation even a superconducting cable
wouldn't be enough.

Or have I missed something?


Frank McKenney
--
For the things we have to learn before we can do them, we learn by
doing them. -- Hannah Arendt
--
Frank McKenney, McKenney Associates
Richmond, Virginia / (804) 320-4887
Munged E-mail: frank uscore mckenney aatt mindspring ddoott com