wrote in message
...

On Wednesday, April 9, 2008 3:46:21 PM UTC+1, Paul Waites wrote:
Hi all,

I have a bad black mould problem and am going to have to redecorate
several rooms.... I have found some Dulux trade antifungal white
emulsion which will do the ceilings but would like to do something about
the walls. Does anyone know of an additive that could be added to
standard emulsions, or a treatment that would use to inhibit the return
of the mould. I've spent a lot of effort with mould cleaner and
scrubbing to remove it and I would like to keep it away as long as
possible.

Thanks for any ideas,

Paul.

Add Silver Shield Antibacterial Paint Additive to your washable water based
paint, and you will have permanently antibacterial painted walls. Silver
Shield is concentrated and will last the lifetime of the paint. Completely
harmless to humans but will kill 99.99% of all bacteria on contact. Add
Silver Shield to any Acrylic gloss, Emulsion, interior or exterior wall
paint, water based fence or decking stain/paint, tile grout or any other
building material that you want to protect against mold or mildew - SILVER
SHIELD WILL ELIMINATE MOLD AND WILL PERMANENTLY PREVENT BACTERIA, MOLD
SPORES AND VIRUSES FROM MULTIPLYING, AND WILL LAST THE LIFETIME OF THE
TREATED SURFACE - FOREVER. Add just 2ml per litre of paint or kilo of grout,
mix very thoroughly to ensure even distribution. Silver Shield is
colourless, odourless and completely safe for use in childrens rooms,
hospitals, surgeries, food preparation areas, toilets etc. Silver Shield
works, it has been thoroughly tried and tested, meets ISO 22196:2011 for
hygiene. Silver Shield is completely inert to humans and animals, just
billions of silver particles that when in contact with microbes will
completely prevent them from reproducing, thus they will die out in small
numbers before becoming unsightly and hazardous moldy patches. THIS 10ml
DISPENSER IS ENOUGH FOR 5 litres of water based paint or 5 kilo's of grout.

I sell this product and have used it several times. Anyone who uses Silver
Shield as instructed, has my personal personal guarantee that it works, if
you look up silver ions, nano silver, or silver particles on any scientific
report you will see the simple science behind how Silver Shield
Antibacterial Paint Additive works.

The above is bollix.
You have a damp problem that needs to be eliminated.. (Probably
condensation.)
Probably by ventilation, at source is best. (extractor fans in
showers/cooker hoods. etc.)
You might want to look at the house insulation in general too.

To get rid of the black mould, you can buy an algicide from any builders
merchant.
Or even bleach. Some algicides are persistent (hence lastlonger)
Then redecorate. using anti fungal paint is good