Thread
:
Unusual RS232C connector on Tatung tablet, TWN-5213 CU.
View Single Post
#
4
Posted to sci.electronics.repair
Maynard A. Philbrook Jr.
external usenet poster
Posts: 132
Unusual RS232C connector on Tatung tablet, TWN-5213 CU.
In article ,
says...
On 27/11/2014 04:28, Peter Easthope wrote:
A photo of the unusual RS232C connector on Tatung tablet, TWN-5213 CU, is here.
http://carnot.yi.org/TatungTWN5213RS232.png
The smallest increment on the steel rule is 1 mm. The connector is essentially a socket about 20 mm x 4 mm. Centered in that is a plastic blade with 8 contacts on each side. Adjacent contacts are about 1.6 mm apart. The round hole on the left is the CPU reset.
Can anyone ID this connector? I've never seen another and haven't found it in Google Images.
Thanks, ... Peter E.
Assuming more than curiosity
Are the contacts sprung? If so then I made up something similar,
outragiously expensive proprietary otherwise, from some scrap PC-slot
card edge fingers, of right spacing. Then appropriate packing as a bit
too thin as they stood and some empty surround from a regular connector.
When you know all the contacts are good and the surround fits
registered, glue the lot together
The more I think about it, being a tablet and all, I would bet that
it's the connector for the docking station.
Jamie
Reply With Quote
Maynard A. Philbrook Jr.
View Public Profile
Find all posts by Maynard A. Philbrook Jr.