On Thursday, 13 November 2014 08:31:32 UTC, Chris French wrote:
In message , PeterC
writes
On Wed, 12 Nov 2014 19:54:50 +0000, Lawrence wrote:

My house had a 60A fuse on the incoming cutout. I rang Western Power
to enquire about an upgrade and within 90 minutes it was done. I now
have 80 amp fuse and was told it could go up to 100 amp if the cutout
was changed. Incredible service.
The question though. What current fuse is normal these days?

When my meter was changed about 3 years ago the chap wanted to put in a new
80A fuse in place of the 100A; I persuaded him to fit a new 100A instaead.
Seems that there might be a desire to /reduce/ load - I wonder why.

Unlikley I'd have thought.

how many people consider the rating of their main fuse when using their
electrical devices,

I have been, in fact last night I 'installed' a new energy meter
http://www.amazon.co.uk/Efergy-Wirel...rgy+monitor+e2

as the previous one from npower died.
My fuse says 60 amps, ~ 14.4KW

my water heater cyclinder 3KW
2 storage raidaitors about 2.4KW each.
1 ex storage raidaitor (not removed was 3.4KW)
-----------------------
An electric cooker 2-3KW depending on what's used.
1 bathroom heater ~2kw
2 convector heaters about 2KW each.

So when my CH was first switched on the total would be
3+4.8+3.4 =11.2KW

so in theory without any lights on and switching on my kettle
I get to almost 60A or 14.2KW.

With a TV and 2 computers it doesn't leave me much headway if any.

I exceeded 11.5KW last night at about 12:30am, as I was testing the alarm function of the energy unit.

Think I'll set my alarm for 13KW


and when was the last time you heard of someone
blowing their main fuse?

Personally never, but I've not personally known anyone to die from an electric shock.
I'm not sure exactly when such a fuse will blow, or rather at what precise current as that varies with time and temperature.
Might make an intresting practical lab.