View Single Post
  #2   Report Post  
Posted to sci.electronics.repair
Phil Allison[_3_] Phil Allison[_3_] is offline
external usenet poster
 
Posts: 1,249
Default Sharp fax machine - changing the lithium battery (yes, I know)

Peabody wrote:

I know this is a long shot, but someone may know. I have a Sharp model UX-
D1200SE fax machine which actually works well. But I only need it a couple
times a year, so I don't leave it plugged in. It has a lithium battery that
keeps time and the settings, but the manual says it must be replaced by an
authorized service center. I called Sharp, and they repeated that
requirement, but said they have no service center where I live, so I would
have to send in the machine to them to get the battery changed. They refused
to tell me how to replace the battery. Right.

I've looked over the machine carefully, and don't see any likely entry for
this. And I can't find anything about this through Google.

Any info or suggestions would be appreciated.



** Many Lithium cells are mounted on the main PCB, held by solder links that are attached to the cells.

For example;

http://www.henlimax.com/imageReposit...1af80ef215.gif

They normally last anywhere from 10 to 20 years.

So, you have to open the machine, find the cell and then get one like it.

Remove the old one and fit the new one with a soldering operation.


.... Phil