View Single Post
  #5   Report Post  
Posted to uk.d-i-y
Phil L Phil L is offline
external usenet poster
 
Posts: 4,010
Default Striping wall paper from plasterboard


"Chris French" wrote in message
...
I need to strip wallpaper from plasterboard walls. Standard wallpaper, not
vinyl, an inpreinted sort of vertical strip pattern., direct to the
plasterboard, no skim.

No option really, this is the old bathroom I'm turning into bedroom. Walls
mostly plasterboard over lathe and plaster and brick walls (I assume to
get a nice flat surface for tiling?). It was tiled up to about 4 feet all
the way round. As I expected trying to remove the tiles left the
plasterboard in such a mess, that we just ripped the lot down.

Plan is to replace the plasterboard. and then get the whole lot skimmed

So have the rest of the walls covered in paper. Any tips on removal?

Steam it and then try to pull off rather than scrape?

The alternative thought is to leave paper on, replace plasterboard , not
skim and then lining paper over the whole lot. But then there is the
messing about with taping/filling/sanding.



I can't make head nor tail of this post.

You've ripped the plasterboard down that had tiles on it because it was a
mess?

You're getting the whole lot skimmed?

Wh are you trying to remove the paper if you're getting it skimmed?

And then you mention not skimming, but papering over plasterboard again!

1) Get as much of the paper off as you can

2) re -plasterboard where it is required - it may be quicker and easier to
get *everything* down to bare brick and start from scratch.

3) plaster the whole lot from top to bottom, then in the future, you aren't
going through this again - it sounds like this is the third time from your
post


papering over bare plasterboard almost always results in it being re
plasterboarded the next time any decorating is required