On 10/17/2014 11:33 PM, whit3rd wrote:
On Friday, October 17, 2014 5:55:36 AM UTC-7, stryped wrote:
I have a dishwasher model number du930pwss0. It will not turn on. There is power to the dishwasher. I measured power on both sides of the door switch. There is 120 volts on both the brown and black wires with the door switch enguaged. Also on the door switch are two white wires. I measure for some reason 100 volts on these.



There is 120 volts on each side of the thermal fuse, so I assume the fuse is good.
I am assuming the only thing left is the control board or the touch panel.

Am I missing anything? Is this worth trying to fix? I think the cost of the control board is about 100 bucks.

I will say the panel lights came on briefely when I was removing the dishwasher to investigate but they never came back on no matter how hard I tried.

You've tested some of the 120VAC wiring, but the lights (and the panel) presumably operates
off a lower voltage. Probably you have a broken wire or other intermittent connection in
the low-voltage power section. That explains the dark panel and

I've "fixed" two dishwashers via the internet. One skipped the drain
cycle, another got stuck in rinse mode. Most electronic controls have a
reset or diagnostic cycle, the trick is to find the magic button
sequence. One I found in a home repair forum, another required a $10
service manual download. Try googling your make and model nunber, or
maybe just make, many controls are similar.