DIYbanter - View Single Post

Michael A. Terrell

wrote:

A GFCI outlet should trip if there is a voltage difference between the ground wire and neutral. Any flow there indicates a potential problem and should cause it to trip off. Without a ground connected, this effectively prevents the GFCI from working properly. The holes at the rear of the box are for ground screws. You should connect the ground to there. Also, it looks like the ground wire is "grounded" to the box by being folded back into the entry hole with contact at that point. This installation was not likely done by an electrician. Proper grounding is necessary for proper functioning of the GFCI outlet.

Wrong. An imbalance between line and neutral is supposed to trip it.
The imbalance is current going to the ground conductor, or another path
t ground that causes the imbalance. GFCI are supplied with labels for
two prong, ungrounded outlets. Since most of what is plugged into a
protected circuit is two wire, they would be useless if they are like
you describe.

--
Anyone wanting to run for any political office in the US should have to
have a DD214, and a honorable discharge.