On 9/21/2014 7:23 PM, Stormin Mormon wrote:
On 9/21/2014 7:45 PM, gonjah wrote:
OK thanks but the cycling thermostat will only cause the heat not to
come on. The drum should still turn. I'm checking it anyway.

I just checked the thermal fuse again. It's fine.

I'll be interested in the high limit cutout. I'll check back in awhile.

Might be a bad run cap on the drive motor?

Belt came off the motor, and now the motor
spins freely?


I'm going to pull the motor out.

I've check the belt and it's on there properly and the motor spins (only
manually) when I turn the drum.

I already said I can't find a pulley switch but it seems like it should
have one.

Jim