View Single Post
  #3   Report Post  
Posted to sci.electronics.repair
Jeff Liebermann Jeff Liebermann is offline
external usenet poster
 
Posts: 4,045
Default Kenwood TM-281A Adjustment Mode

On Sun, 17 Aug 2014 12:52:06 -0400, wrote:

I am aware of a ham-radio NG. Unfortunately due to extremely low
activity, I am posting this message here.

Does anyone know the procedure to access the adjustment mode
menu on my Kenwood 2M TM-281A transceiver? This is the menu
that allows you to adjust the power lever, deviation, etc.


There's very little available for the TM-281a because the TM-271a is
almost identical, except for a difference of 5 watts in Pout. Why
Kenwood would need two almost identical models is an open question
that was discussed in the Yahoo Kenwood group in the past.

For adjustment mode, see instructions at:
http://www.repeater-builder.com/kenwood/pdfs/tm-271a-adjustments.pdf
Good luck.

--
Jeff Liebermann

150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558