View Single Post
  #5   Report Post  
Posted to alt.home.repair
Ed Pawlowski Ed Pawlowski is offline
external usenet poster
 
Posts: 11,640
Default Dyna Glow 20,000 BTU propane heater

On Sun, 27 Jul 2014 18:22:31 -0700, Oren wrote:

On Sun, 27 Jul 2014 21:09:32 -0400, Ed Pawlowski wrote:

On 7/27/2014 3:05 PM, wrote:
I recently picked up a Dyna Glow 20,000 BTU wall heater. I would like to install it at a hunting cabin (400 sq feet). The question I have is if I hook it up to a 20 lb portable propane tank (outside with a line running into the cabin) do I need to use a regulator like a gas grill. I'm thinking I do but I have no experience with anything like this and since I bought it used it didn't come with a users manual so I thought I would check here.


Thanks,
Jim


If it does not have a regulator built in, it will need an external
regulator.


Wouldn't adding one need the correct PSI rating? For example, my
grill and my burner on a outdoor fryer, the regulators are rated at
"10 PSI".


With few exceptions, 10 psi is the standard. There are some
adjustable for high output to 30 psi.