View Single Post
  #5   Report Post  
Posted to alt.home.repair
harry k harry k is offline
external usenet poster
 
Posts: 557
Default First fence post as a bench marker

On Tuesday, July 15, 2014 12:32:06 PM UTC-7, Terry Coombs wrote:
leza wang wrote:

On Tuesday, July 15, 2014 1:28:25 PM UTC-4, Terry Coombs wrote:


leza wang wrote: One side of my house is overlook an Alleway (cars


can drive). I want to build a fence similar to this one (click on


the link below please) http://tinypic.com/r/24n2yja/8 My


house is in similar situation of the picture above (instead of the


green, my house is there). Of course the fence is going to be


build on my property side. I want a protection fence like the one


in the picture because I am afraid in the Winter cars might slip


and hit my house. I started working and dig to install the


Posts. There will be 6-8 post and the distance between them is 6'


feet. My question, should I install the first post (put the gravel


first and then concorete) and then wait to dry and then try to


install pther post so I can use the first one as a bench mark when


I try to make sure they all post are layed on the same level and


the hight are the same. I thought it is good idea to do that. What


do you think Thanks a lot.




I think you should drive a pair of pegs and stretch a string to


establish your line . Use a level to plumb your posts , set 'em a bit


high and cut to height after mounting the top stringer . Cut the tops


at an angle to shed water or they'll rot . And your concrete needs to


be finished slightly above ground and sloped away from the post for


the same reason . -- Snag




Thanks for your reply. Can you please tell me what do you mean by


".. should drive a pair of peges"?




I also want to ask, my post will be 4f high, is it ok to burry 1f


of the post or more (like 1.5 f or 2 f)?




Thanks a lot.




Put a peg in the ground at each end of where you want your fence , and tie a

string tightly between them . THis will establish a straight line to guide

your pole placement . I use 8 foot treated 4x4 posts they're dead cheap -

bury them a *minimum* of 24" deep , depending on the frost line in your area

.

--

Snag

If what I posted is really that hard to understand , you should probably

hire somebody to build your fence .


Better practice is to set the two end post and then stretch a string. You're gonna have to restretch the string using those two end posts anyhow.

Harry K