On Fri, 13 Jun 2014 01:01:54 -0400, John
wrote:
Joe "Dufu" wrote:
On Mon, 09 Jun 2014 13:24:01 -0500, "Pete C."
wrote:
Joe \"Dufu\" wrote:
Here are the very basics of what I need. If you know someone who can
offer it, please let me know and I'll put you or the contact in touch
with my engineer / purchasing guy to see if we can place an order. He
will provide drawings and better specs.
DOM tubing - steel
2.750" ID +/- 0.001" (prefer 0.0005")
3.000" OD
5.430" length per part.
Hard Chome Plating inside prior to honing will likely be necessary.
I don't care if the folks do it in 40' lengths and then part it to
length or if they do it piece by piece... I simply need the parts
made and am doing all I can to stay out of Asia for these... HELP!?!
Quantities are not huge, but not 5 pc. orders either. We would
probably order around 250 pcs. on an order after seeing proof of
quality.
Isn't that basically hydraulic cylinder tubing which I believe is
available off the shelf and not very expensive?
Yep. +/- 0.005" Can't use it on a precision machine like mine. Works
fine for push-pull, but not for a quality drill spindle cylinder.
I can run them off for you. I should have a mandrel for the sunnen 1801.
john
Sorry, was in Africa doing some touring and even a bit of metalworking
(had to cut stainless steel rods for a well project - by hand - no
collant - outside.) See photo links below if you'd like...
e-mail me directly or reply with some sort of contact info if you
would like to quote the parts for us.
Here are the photo links:
Here are some links to the photos we took while in Ghana. You should
be able to see them even if you do not have Facebook.
This was 80% vacation, 20% mission.... With the mission being us
connecting with people I know and fixing a clean water well that had
failed. Glad to report we had success on both.
I'm sending this generic message because I'm swamped with 1900
customer e-mails. I may not check back here anytime this or next
week.
https://www.facebook.com/media/set/?...1&l=61732abf13
https://www.facebook.com/media/set/?...1&l=f5cd9eaaef
https://www.facebook.com/media/set/?...1&l=3d9d11b3ca
https://www.facebook.com/media/set/?...1&l=0d30478695
https://www.facebook.com/media/set/?...1&l=889f7c5e3d
https://www.facebook.com/media/set/?...1&l=4875a21e4e
https://www.facebook.com/media/set/?...1&l=dd992c77ee
https://www.facebook.com/media/set/?...1&l=92828f552d
https://www.facebook.com/media/set/?...1&l=df3ef8c4af
https://www.facebook.com/media/set/?...1&l=a240138eaa
https://www.facebook.com/media/set/?...1&l=d876a23572
https://www.facebook.com/media/set/?...1&l=2de9efde29
https://www.facebook.com/media/set/?...1&l=2196ba38b0
--
Until you wake up, I will fight for you...
Regards,
Joe Agro, Jr.
(800) 871-5022 x113
01.908.542.0244
Flagship Site:
http://www.Drill-HQ.com
Automatic / Pneumatic Drills:
http://www.AutoDrill.com
Multiple Spindle Drills:
http://www.Multi-Drill.com
Production Tapping:
http://www.Drill-HQ.com/?page_id=226
VIDEOS:
http://www.youtube.com/user/AutoDrill
FACEBOOK:
http://www.facebook.com/AutoDrill
TWITTER:
http://twitter.com/AutoDrill
V8013-R